Fluke 87V IMSK Industrial Multimeter Service Combo Kit

This combo kit combines the Fluke 87V multimeter with the i400 AC current clamp to provide resolution and accuracy for troubleshooting electrical systems. The kit includes special accessories and saves over 15% compared with individually priced items.

The Fluke 87V Multimeter features true-RMS accuracy and advanced functionality. It offers true-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording. It efficiently troubleshoots motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast as 250 microseconds. It includes a lifetime warranty.

The Fluke i400 AC 400A Current Clamp turns the 87V into a clamp meter. The current clamp provides accurate current measurements up to 400 A AC without breaking electric circuits and allows safe measurements with industry standard safety ratings.

Select accessories include a temperature probe, test leads, and alligator clips. The 80BK-A DMM Temperature Probe plugs into the 87V's voltage jacks and allows temperature measurements from -40 °C to 260 °C. TL75 Test Leads and AC175 Alligator Clips complete this versatile kit.

Key safety features include Safety rated CAT III 1000 V, CAT IV 600 V meter. It is designed to withstand spikes exceeding 8000 V with audible input alert warning against wrong use of input jacks.

Fluke 87V Multimeter Specifications: Maximum DC Voltage: 1000 V DC Voltage Accuracy: ±(0.05% + 1) Maximum DC Voltage Resolution: 10 µV Maximum AC Voltage: 1000 V AC Voltage Accuracy: ±(0.7% + 2) True RMS AC Bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum AC Voltage Resolution: 0.1 mV Maximum DC Current: 10 A (20 A for 30 seconds maximum) DC Current Accuracy: ±(0.2% + 2) Maximum DC Current Resolution: 0.01 µA Maximum AC Current: 10 A (20 A for 30 seconds maximum) AC Current Accuracy: ±(1.0% + 2) True RMS Maximum AC Current Resolution: 0.1 µA Maximum Resistance: 50 MΩ Resistance Accuracy: ±(0.2% + 1) Maximum Resistance Resolution: 0.1 Ω Maximum Capacitance: 9,999 µF Capacitance Accuracy: ±(1% + 2) Maximum Capacitance Resolution: 0.01 nF Maximum Frequency: 200 kHz Frequency Accuracy: ±(0.005% + 1) Maximum Frequency Resolution: 0.01 Hz Maximum Duty Cycle: 99.9% Duty Cycle Accuracy: ±(0.2% per kHz + 0.1%) Duty Cycle Resolution: 0.1% Temperature Measurement Range: -200.0 °C to 1090 °C / -328.0 °F to 1994.0 °F (excluding probe) 80 BK Temperature Probe Range: -40.0 °C to 260 °C / -40.0 °F to 500 °F, accuracy 2.2 °C or 2% Maximum Conductance: 60.00 nS Conductance Accuracy: ±(1.0% + 10) Conductance Resolution: 0.01 nS Diode Range: 3 V Diode Resolution: 1 mV Diode Accuracy: ±(2% + 1) Operating Temperature: -20 °C to +55 °C Storage Temperature: -40 °C to +60 °C Humidity (without condensation): 0% to 90% (0 °C to 35 °C) / 0% to 70% (35 °C to 55 °C) Operating Altitude: 2000 m Overvoltage Category: EN 61010-1 to 1000 V CAT III, 600V CAT IV Agency Approvals: CE, CSA, RCM Size: 201 x 98 x 52 mm (with holster) Weight: 355 g / 624 g (with holster) Digital Display: 6000 counts, updates 4/sec / 19,999 counts in high-resolution mode Analog Display: 32 segments, updates 40/sec Frequency Display: 19,999 counts, updates 3/sec at > 10 Hz Battery Life (Alkaline): ~400 hours typical, without backlight Shock: 1 Meter drop per IEC 61010-1:2001 Vibration: Per MIL-PRF-28800 for a Class 2 instrument

Fluke i400 AC Current Clamp Specifications: Nominal Current Range: 400 A Continuous Current Range: 1 A to 400 A Maximum Non-destructive Current: 1000 A Lowest Measurable Current: 1 A Basic Accuracy: 2% + 0.06 A (45-400 Hz) Useable Frequency: 5 Hz to 20 kHz Output Level: 1 mA/A Safety: CAT IV 600 V, CAT III 1000 V Maximum Voltage: 1000 V AC rms from earth to ground Maximum Conductor Diameter: 32 mm (1.25 in) Maximum Conductor Size (busbar): 750 MCM Output Cable Length: 1.5 m (59 in) Shrouded Banana Plugs: Yes